Yorkville YSM Series II YSM8-2 8-Inch Powered Studio Monitor
Manufacturer's Description
The YSM8-2 features 1-inch black-silk diaphragm neodymium dome tweeters. These tweeters blend seamlessly into the specially designed low-diffraction waveguide which is integrated into the front baffle. The edges of the wave-guide perfectly couple the tweeter with the woofer, reducing sonic anomalies normally associated with driver/tweeter proximity. The fibre-reinforced composite cone woofers have also been designed to perform with sonic excellence, providing a wide dynamic range at all levels. Integrated DSP is utilized to deliver transparent signal processing and bi-amplification has been optimized for each driver. The woofer and tweeter have been perfectly time aligned to eliminate any phase irregularities usually associated with 2-way designs.
Features
- 8-inch low frequency driver; 1-inch silk dome tweeter
- Balanced XLR and 1/4- inch TRS inputs
- Unbalanced RCA input
- High and Low Frequency Adjust Controls
- Built in HF and LF limiters
- Volume Control
Specifications
- System Type: 2-Way
- Active or Passive: Active
- Power Rating (Watts): 100
- Biampable: Self Powered
- Biamp Operation Only: Yes
- Max SPL (dB): 105
- Frequency Response (Hz +/- 3db): 40Hz-22kHz
- Crossover Frequency (Hz): 2.1 kHz
- HF Driver(s): Neo Soft dome Ferro Fluid
- HF Power Rating (Watts): 25
- HF Protection: Therm, Over voltage, Clip
- LF Driver(s): 8-inch composite
- LF Power Rating (Watts): 75
- LF Protection: Therm, Over voltage, Clip
- HF Distortion: 0.015
- LF Amplifier Type: Class D
- LF Distortion: 0.01 %
- Cooling Scheme: convection
- Power Cable: Included
- Power Switch: Back, with LED on Baffle
- Inputs - 1/4"" Jacks: 1
- Inputs - XLR: 1
- Level Controls: 1
- LED Indicators: power on front
- Enclosure Materials: MDF
- Baffle Material: MDF/ABS
- Covering / Finish: Textured Vinyl
- Dimensions (DWH xbackW, inches): 10.8 x 10.25 x 16.5
- Dimensions (DWH xbackW, cm): 27.43 x 26.04 x 41.91
- Weight (lbs/kg): 21 / 9.5