Skip to content
SKU XE-XW-2-BLUE

Xotic Effects XW-2 Wah Guitar Effect Pedal, Limited-Edition Metallic Blue

$220.00
Free 2-Day Shipping

Xotic Effects XW-2 Wah Guitar Effect Pedal, Limited-Edition Metallic Blue

$220.00
FREE 2-Day Shipping

Manufacturer's Description

A refined wah pedal design with an emphasis on “Maximum Tone with Minimal Fiddling”

The wah tone and EQ are dialed in to perfection making accessing the perfect wah sound easier than ever. With plug-and-play simplicity, you can achieve the finest wah sound that will truly elevate your creative ingenuity. The pedal features a custom wound inductor, pot and circuit which not only captures the pure essence of vintage Clyde McCoy (as XW1 did), but also breathes an evolved essence (of wah) that goes beyond vintage. As with the XW-1, the pedal has a relay-based true bypass switch and adjustable rocker tension to optimize your rocker pedal to your liking.

Legendary Tone with a Modern Twist

With the Xotic XW-2 Wah you don’t get one or three sounds in one pedal, you get unlimited sounds with unique controls that shape and contour your sound the way you hear it!

ADJUSTABLE PEDAL TORSION — Fully-adjustable rocker pedal torsion by adjusting Hex nut on the treadle.

LED INDICATOR — The LED indicator is located at the top of the Xotic XW-2 Wah and lights up when the pedal is on. One unique feature of the Xotic XW-2 Wah is the LED will flash if the battery power falls below 50% and indicates that it is time to change the battery.

DC JACK — 2.1mm x 5.5mm 9VDC — Negative Center. When an external power supply is used, the battery is disconnected from the circuit. When using a battery, the life of the battery can be extended if you unplug the input when the effect is not in use for long periods of time. Battery access is through the removal of the bottom plate (4 screws).

Specifications

  • Dimensions (W/D/H): D 8.27” (210mm) W 3.94” (100mm) H 2.64 (67mm)
  • Weight: 2.16lb. (980g)
  • Bypass: True Bypass Switching
  • Power Consumption: 9VDC/5mA
  • Battery Type: 9VDC (006P) x 1
  • AC Adapter (Optional): 9VDC-18VDC, Negative Tips (Regulated recommended)
  • Input Impedance: 1M ohm
  • Output Impedance: 10k ohm
  • Nominal Input Signal Level: -20 dBV
  • Nominal Output Signal Level: -20 dBV