Skip to content
SKU BU-WESAUDIO-MIMAS-TITAN

WesAudio MIMAS NG500 500 Series Analog Compressor w/ Titan 10-Slot Chassis

$2,198.00
SAVE $500.00

Manufacturer's Description

WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall

PROMETHEUS is fully analog passive EQ with +24dBu of headroom. It features pultec-style warm sound with a lot of innovative improvements. Its modern approach to design allows instant recall of your classic vibe through very flexible plugin available in most common formats. PROMETHEUS as all ng500 products, integrates with your DAW environment via front panel USB socket or TITAN chassis.

FEATURES

INNOVATIVE DESGIN with fully ANALOG CIRCUIT

PROMETHEUS is fully analog equalizer with +24 dBu of headroom.

Passive EQ

  • Low section with boost and cut, frequencies: 20, 30, 60, 100, 120, 250 Hz.
  • High boost section with following frequencies – 2, 3, 4, 5, 8, 10, 12, 16 kHz.
  • High cut section with following frequencies – 4, 8, 12, 20 kHz.

STEREO / DUAL MONO / MID-SIDE operation modes

PROMETHEUS can work in 3 different modes, including MS, which makes it perfect solution for multiple applications!

OUTPUT CONTROL

POST-EQ OUTPUT control for better flexibility!

HARDWARE A/B

Even using _PROMETHEUS as pure analog signal processor you can easily switch between two parallel settings with a magic of a simple button.

THD – ADD COLOR TO YOUR MIXES

THD stands for “Total harmonic distortion” and it allows to saturate your signal with beautiful analog color.

FLEXIBLE DAW / LIVE PLUG-IN control for instant recall

  • Stereo plugin which handles all modes of operation – Stereo/Dual Mono/Mid-Side
  • Mono plugin where two separate instances can connect to same
  • hardware managing each channel separately
  • IN/OUT metering with clip detection
  • Plugin comes in AAX/AAX DSP/VST3/VST2/AU

Features summary:

  • +24dBu of headroom
  • Stereo / Dual mono / Mid/Side operation mode
  • Passive equalizer (Pultec-style) design based on inductors
  • Low frequency boost/cut – 20, 30, 60, 100, 120, 250 Hz.
  • High frequency boost – 2, 3, 4, 5, 8, 10, 12, 16 kHz.
  • High frequency cut – 4, 8, 12, 20 KHZ.
  • Analog inductor
  • Proprietary THD implementation
  • Flexible DAW/Live plug-in control for instant recall
  • 6 touch sensitive encoders allows to record automation
  • True bypass
  • In and OUT metering with clip detection
  • A/B compare feature

WesAudio TITAN 10-slot NG500 Recall Chassis

TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It extends 500 series connector with additional pins where modules can be designed to support digital recall or any other vendor specific functionalities. This extension is part of new open standard “ng500” – “Next Generation 500 series” which allows other manufacturers to design and implement digitally controlled analog devices.

MAIN FEATURES

HIGH END LINEAR POWER SUPLY

Linear power supply capable to deliver 5A of power will bring sound of your units to the next level!

10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*)

_TITAN can host standarized 500 series module (Please read Important Note below).

Of course it was designed to recall up to 10 units with signle USB or Ethernet connection!

(*)Important note about 500 series extension : ng500

CONTROL ALL MODULES THROUGH ONE CONNECTION!

  • TITAN allows to control/recall all hosted modules through one connection:
  • 1) USB – for direct connection with your workstation.
  • 2) Ethernet – dedicated LAN connection to access all devices in your local network.

REMOTELY CONTROLED STEREO LINKS

TITAN provides simple standalone application to change status of stereo links between modules.

No more problems with accessing your chassis configuration!

IAC – INTERNAL AUDIO CONNECTOR

At slot number 10, _TITAN implements special connector, which routes all audio signals from and to, slots 1 – 8.

This allows future integration with audio interface modules, analog summing modules or patchbays.

INPUT source for any slot is implemented through analog relays, and it is configurable through standalone application. This prevents two different signal sources to be routed to the same module.

Features summary:

  • 10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*),
  • HIGH END LINEAR POWER SUPLY capable to deliver 5A of power,
  • CONTROL/RECALL ALL MODULES THROUGH ONE CONNECTION,
  • OPEN SPECIFICATION (**) – documentation and software framework including communication drivers for
    any Vendor that would like to adopt to this standard,
  • REMOTELY CONTROLED STEREO LINKS through standalone application,
  • IAC – INTERNAL AUDIO CONNECTOR – for future integration with audio interface, summing modules or patchbays

Features:

  • Stereo links are integrated with modules, and pressing “Link” button on modules which supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan.
  • Remote firmware upgrade – _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection.
  • XLR sockets in/out for each slot.
  • Internal stereo link switches which can be also managed through GConManager standalone application.
  • Power mode switch – 115V/230V.

Specifications

WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall

  • Attack time: 20us – 800us
  • Release time: 50ms – 1100ms
  • Compression ratio : 4:1; 8:1; 12:1; 20:1; all button mode
  • True Bypass
  • SC High Pass filter – 60,90,150Hz
  • Output impedance : 600ohm
  • Freq. response : 20Hz do 20kHz (+/- 1dB)
  • Signal to noise ratio SNR : >83dB
  • Power consumption: 3W (100mA/+16V i 60mA/-16V)