TEAC TN-300NA 2-Speed Analog Turntable (Natural)
Turntable section | |
Drive System | Belt Drive |
Motor | DC Motor |
Speed | 33 1/3 RPM, 45 RPM |
Rotation Speed Variation | +/–2% |
Wow and Flutters | 0.2% |
Signal-to-Noise Ratio | 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) |
Platter | Aluminum Die-cast |
Diameter of Platter | 12", 30cm |
Tonearm section |
|
Type | Static Balance, Straight |
Effective Arm Length | 8.8", 223mm |
Stylus Pressure Range | 0 to 5g |
Supported Cartridge Weight | 3.5 to 8.0g |
Anti-skating Adjustment | Supported |
Cartridge section |
|
Type | MM type (audio-technica AT95E factory installed) |
Stylus Shape | Elliptical |
Stylus Construction | Bonded Round Shank |
Mount | Half inch |
Frequency Response | 20Hz to 20kHz |
Channel Separation | 20dB at 1kHz |
Channel Balance | 2.0dB |
Tracking Force | 1.5 to 2.5g |
Vertical Tracking Angle | 20 degrees |
Supported Load Impedance | 47k ohms |
Output Voltage | 4.5mV +/–3dB |
Stylus Pressure | 2.0g +/–0.5g |
Cartridge Weight | 5.7g +/–0.5g |
Head-shell Weight | 10g (including Screws, Nuts and Wires) |
Replacement Stylus | audio-technica ATN95E |
Phono Equalizer Amplifier |
|
Type of Amplifier | MM type (On/Thru switchable) |
Analog Output | |
Connector | RCA Pin jack (Gold-plated) |
Output Voltage | Phono/Line switchable |
Phono Output | 4.5mV +/–3dB |
Line Output | 120mV (–13dBV) |
USB Output section | |
Connector | USB B type |
Output Signal | PCM 48kHz/16-bit |
Supported OS | Windows 7, Windows 8, Windows 8.1, OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9) |
Power | AC 100 to 240V, 50/60Hz |
Power Consumption | 1.5W (less than 0.5W at Standby) |
Overall Dimensions (W x H x D) |
16.5" x 4.6" x 14.0" 420 x 117 x 356 mm |
Weight | Approx. 10.8 lbs. 4.9 kg |
Accessories | Rubber Sheet, EP Adapter, Counter Weight, Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, USB Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card) |
Manufacturer's Description
The TN-300 is a belt-drive analog record player with a stylish chassis containing an MM Phono equalizer amplifier with USB output. The TN-300 supports Phono and Line output, which allows you to play vinyl with a stereo that isn’t equipped with Phono input, and Phono equalizer amplifier of your hands. You can transfer music from vinyl records to your Mac or PC, using the USB digital output. CD quality digital archiving with the USB output preserves your vinyl collection and also allows you to enjoy vinyl records with a smartphone or Digital Audio Player. Using audio-technica’s AT95E VM cartridge, the TN-300 lets you enjoy high accuracy tracking sounds as soon as you set up. An aluminum die-cast, High inertia platter has also been attached. The TN-300 is the perfect turntable for any music lover, from first time users to audiophiles, who appreciates high quality sounds and sturdy yet stylist design.
Authentic belt-drive turntable
The high inertia Aluminum die-cast platter is driven by a high torque DC motor with durable Neoprene® rubber which achieves a stable rotation. The high accuracy of the spindle is maintained by the polished Stainless steel Spindle and the highly durable bronze spindle holder
Luxury and authentic external design
The heavy MDF cabinet which can minimize the unfavorable resonance, with its multi-layered coating and glossy finish give a sophisticated polish to a durable exterior.
MM type cartridge phono equalizer amplifier
Enjoy vinyl playback with any amplifier. The TN-300 supports both phono and line output that allows you to play vinyl with or without phono equalizer.
Built-in USB Digital Output and Analog Phono/Line Output
The TI-made A/D converter allows you to transfer music via USB to your PC and digitize your vinyl collection. You can protect your vinyl records from damage caused by playback, whilst enjoying the quality of vinyl via your digital audio player. A pair of gold-plated RCA connectors are employed for conventional way of connections with either Line or Phono input of your amplifier.
Corrosion resistant gold plated terminals
The Gold-plated terminals prevent oxidation of the head shell connectors. When replaced frequently the head shell also prevents oxidation of the terminal.
Static balanced straight type tone arm
A straight tone arm has been used for high tracking accuracy. The anti-skating mechanism ensures accurate tracking of phonograph records.
2-speed Turntable including 33-1/3 and 45 RPM for LP/EP record playback
The TN-300 can play both LP and EP records. The Manual arm lifter ensures seamless analog playback.
audio-technica MM(VM)type phonograph cartridge AT95E
The TN-300 comes with an audio-technica VM type cartridge with a reputation for highly accurate reading. As soon as you set up the TN-300, you can enjoy the high quality sound with outstanding clarity and detail.
Features
-
Authentic belt-drive turntable
-
Cabinet with multi-coated veneer and beautiful wood grain (TN-300-CH)
-
Cabinet with glossy piano finish (TN-300-B, TN-300-R, TN-300-W)
-
Manual arm lifter for analog playback
-
Static balance straight type tone arm
-
Anti-skating system prevents tracking errors
-
USB digital output for transferring music from vinyl to Mac or PC
-
Built-in phono equalizer amplifier for MM type cartridge (Line/Phono output switchable)
-
2-speed Turntable including 33-1/3 and 45 RPM for LP/EP record playback
-
Audio-Technica made MM (VM) type cartridge (audio-technica AT95E) included
-
Corrosion resistant gold plated terminals