Skip to content
SKU SKB-3i-13096PC4K

SKB Cases 3i-13096PC4K iSeries Waterproof Blackmagic Design Pocket Cinema Camera 4K/6K Case

$174.99

SKB Cases 3i-13096PC4K iSeries Waterproof Blackmagic Design Pocket Cinema Camera 4K/6K Case

$174.99

Manufacturer's Description

This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K or 6K with lens attached, lens hood section, two lens slots, and an accessory compartment. A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.

All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J / IP67). Other standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810G).

Features

  • Custom cut PE foam to fit the Blackmagic Pocket Cinema Camera 4K or
  • 6K with a longer lens attached, lens hoods, two lenses, and accessories
  • Unconditional Lifetime Warranty
  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion, fungus, and impact-resistant (MIL-STD-810G)
  • Complete gasket seal makes this case absolutely watertight (MIL-STD-C4150J / IP67)
  • Automatic ambient pressure equalization valve (MIL-STD-648C)
  • Molded-in hinge
  • Rubber over-molded cushion grip handle
  • Locking loops for a customer-supplied padlock
  • Trigger release latches

Specifications

  • Exterior Length
    • 14.73 in
    • 37.41 cm
  • Exterior Width
    • 11.94 in
    • 30.33 cm
  • Exterior Depth
    • 7.31 in
    • 18.57 cm
  • Carton Length
    • 15.50 in
    • 39.37 cm
  • Carton Width
    • 12.50 in
    • 31.75 cm
  • Carton Depth
    • 8.00 in
    • 20.32 cm
  • Product Weight
    • 5.20 lb
    • 2.36 kg