Neunaber Audio Immerse Reverberator Mk II Stereo Reverb Guitar Effect Pedal

Manufacturer's Description

Eight Stellar Stereo Reverbs — Zero Learning Curve

The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.

Features

• High-quality buffered bypass, perfect for placing at the end of the signal chain
• Trails switch
• Kill Dry switch for parallel effect loops
• Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
• Analog dry signal for low noise and zero latency
• Small, pedalboard-friendly footprint
• Requires standard 9V pedal power supply (not included)
• Designed and manufactured in California USA

Effects

The Immerse Mk II is packed with eight versatile reverb effects:

• W3T (Wet v3) — Our flagship reverb algorithm is smoother and more three-dimensional sounding than ever before. With adjustable pre-delay, it enhances what you play without covering it.
• Plate – Bright and diffuse like a studio plate reverb.
• Hall – The lush, open sound of a concert hall with adjustable modulation depth for achieving deep modulated tones.
• Spring – The distinctive twerp of a tube-driven spring reverb. With adjustable modulation speed, it can achieve a vibrato-spring sound.
• Sustain  – A new algorithm built on the W3T reverb. This magical, versatile effect can be configured as a sustainer or infinite reverb.
• Echo – Combining the W3T reverb with stereo echo.
• Detune – Adds a detuned double of the dry signal with reverb. The blend control adjusts the amount of detune vs. detuned reverb.
• Shimmer – Reminiscent of a synth pad that follows what your instrument plays, this effect combines the best qualities of our previous shimmers.

Controls

• Effect Select
• Mix, from 100% dry to 100% wet
• Reverb Depth (+Echo Repeats)
• Effect Dependent Control 1
  • Tone (Wet, Plate, Hall, Spring, Shimmer, Detune)
  • Echo Time
  • Hold Time (Sustain)
• Effect Dependent Control 2
  • Pre-Delay (Wet, Plate)
  • Modulation (Hall, Spring, Sustain)
  • Reverb-to-effect Blend (Echo, Detune, Shimmer)

Specifications

• Electrical
  • Input level: instrument / consumer line level
  • Input impedance: 1 MΩ
  • Frequency response: 20 Hz—30 kHz
  • Total harmonic distortion: < 0.01%
• Power
  • Input : 9-12 V DC, 100 mA
  • Connector: center-negative, 5.5 mm OD x 2.1 mm ID
• Physical
  • Dimensions: 2.6” x 4.6” x 1.9” / 63 mm x 115 mm x 46 mm
  • Weight: 6.7 oz / 190 g