Skip to content

Nady Systems PEM-01 Single Channel UHF Wireless In Ear Monitor System


Nady Systems PEM-01 Single Channel UHF Wireless In Ear Monitor System


Manufacturer's Description

The revolutionary Nady PEM multi-frequency, in-ear wireless monitor series allows either one or multiple performers (additional receivers not included) the ability to receive crystal clear in-ear audio mixes.

The The PEM-01 features 16 available frequencies is rackmount-able and each receiver comes with comfortable EB-6 behind-the-ear access earbuds. The Nady PEM-01 Wireless Personal In-Ear Monitor System is an all-in-one wireless audio monitor solution for direct, uncompromised high-quality referencing. The Nady PEM-01 Wireless Personal In-Ear Monitor System provides clear audio transmission up to 300-feet, extended battery-life up to 11 hours of use, and a virtually endless expansion of receivers; serving perfectly for the most demanding musical and audio applications. The Nady PEM-01 Wireless Professional In-Ear Monitor System includes a PEM-01 Wireless Transmitter, PEM Wireless Receiver, and EB-6 behind-the-ear monitor earbuds.


  • Frequency Response: 20Hz – 20,000Hz ±3dB
  • Dynamic Range: 120dB (A-weighted)
  • Total Harmonic Distortion: <0.1%
  • Latency: 3ms
  • RF Carrier Frequency Range: 16 user-selectable frequencies between 902 and 928MHz
  • Operating Range: Up to 300 ft. typical (depending on site conditions); optimum line-of-sight
  • Outputs: 1/8” (3.5 mm) receiver headphone jack (515mV/no load)1/8” (3.5 mm) Unbalanced line output jack (326mV/no load) 1/4” (6.35 mm) transmitter headphone jack (383mV/no load)
  • Transmitter Battery Type: 2 AA Alkaline
  • Transmitter Battery Life: Up to 11 Hour


  • Frequency Range: Frequency Range: 903.250MHz – 927.650MHz
  • Frequency Response: 60 Hz – 17,000 Hz (±3dB)
  • Dynamic Range: 98dB
  • Signal-to-Noise Ratio: > 80 dB, with proprietary companding noise reduction
  • Operating Range: 300 feet line-of-sight


  • Controls: Power/Mute On/Off
  • Connectors: ¼"" Stereo headphones monitor out, two unbalanced ¼†line level inputs, 21mm barrel-type DC input jack; BNC antenna socket
  • Power Requirements: DC 12V/1000mA
  • Dimensions: 8.25x 7.125x 1.75
  • Weight: 2.2 lbs


  • Connectors: 3.5mm dual mono headphone output, 3.5mm line output
  • Controls: Power/Mute On/Off
  • Belt Clip
  • Power Requirements: 2xAA
  • Battery Life: up to 11 hours