MXL 550/551 Condenser Microphone Kit with Mic Stands and Cables
MXL 550/551 Condenser Ensemble Microphone Kit Red
Transducer |
Pressure Gradient Condenser |
Polar Pattern |
Cardioid |
Frequency Response |
30Hz - 20kHz |
Sensitivity |
15mV/Pa |
Signal-to-Noise Ratio |
500: 80dB 551R: 78dB |
Max Input Sound Level (SPL) |
500: 130dB 551R: 137dB |
Power Requirements |
48V Phantom Power |
Output Impedance |
500: 200 Ohms 551R: 110 Ohms |
Output Connectors |
3-Pin XLR Male |
Pad |
No |
Low Frequency Roll-Off |
No |
Dimensions (LxDiameter) |
500: 6.69 x 1.85" (170 x 47mm) 551: 5.25 x 0.87" (134 x 22mm) |
Weight |
500: 0.8 lbs (363g) 551: 0.2 lbs (91g) |
Ultimate Support JS-MCFB50 Short Mic Stand with Fixed-length Boom
-
Product Name: JS-MCFB50
-
Part Number: 16795
-
Boom Length: 24” (610mm)
-
Height: 16” – 23” (406mm – 584mm)
-
Threading: 5/8”
-
Weight: 3.65 lbs. (1.66 kg)
Ultimate Support JS-MCFB100 Tripod Mic Stand with Fixed-length Boom
-
Product Name: JS-MCFB100
-
Part Number: 16791
-
Boom Length: 31.5” (800mm)
-
Height: 40.25” – 68” (1022mm – 1727mm)
-
Threading: 5/8”
-
Weight: 5.35 lbs. (2.53 kg)
Manufacturer's Description
MXL 550/551 Condenser Ensemble Microphone Kit Red
The 550/551 from MXL is a professional-quality microphone kit ideal for recording vocals and instruments. The 550 large-diaphragm mic is a robust vocal mic, while the 551 small-diaphragm mic is terrific for a variety of instruments.
Each mic has a pressure gradient condenser capsule with a cardioid pickup pattern for terrific off-axis noise rejection. The mics have internal Mogami wiring for a world-class sonic experience. High SPL capability allows the mics to record loud sources without distortion. Each mic has a standard XLR connector and works via 48V phantom power.
-
Dual microphone kit provides terrific performance for capturing vocals and instruments
-
The 550 large-diaphragm microphone provides a high level of clarity, and is perfect for vocals
-
The 551 small-diaphragm mic is ideal for a variety of acoustic and electric instruments
-
Each mic has a pressure gradient condenser capsule with a cardioid pickup pattern for excellent off-axis rejection
-
Internal Mogami wiring provides a world class sonic experience
-
Standard XLR connectors accept 48V phantom power
-
Mic stand adapters, cleaning cloth, and plastic carrying case included
Pig Hog PHM10 8mm Microphone XLR Cable 10ft
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!
Features
-
High performance microphone cable
-
8mm high quality rubber outer covering
-
Heat shrink protected connectors
-
Lifetime guarantee
Ultimate Support JS-MCFB50 Short Mic Stand with Fixed-length Boom
When it comes to miking sound sources that are close to the floor - such as kick drums or amplifiers - you need the right tool for the job! The JS-MCFB50 Short Mic Stand with Fixed-length Boom fits the bill perfectly, boasting a tripod base for stability and an adjustable height of 16" to 23". The 24" fixed-length boom adds additional flexibility for making sure you're able to place your microphone exactly where you need it.
JS-MCFB50 Short Mic Stand with Fixed-length Boom Features:
-
24" Fixed-length boom arm
-
Metal die-cast housing
-
Standard 5/8" threading
-
Short height for hard-to-get-to spaces
-
Non-slip rubber feet
-
Strong, tip-resistant tripod base
Ultimate Support JS-MCFB100 Tripod Mic Stand with Fixed-length Boom
On stage or in the studio, you need a mic stand you can rely on. The Tripod Mic Stand with Fixed-Length Boom resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand with Fixed-Length Boom to perfect height with the traditional turn clutch.
Features
-
31.5” Fixed-length boom arm for precise positioning
-
Strong, tip-resistant tripod base
-
Scratch-resistant powder coat finish
-
Die-cast leg housing for dependable base support
-
Non-slip rubber feet