Skip to content
SKU BU-JBL-VRX932LAP-111917

JBL VRX932LAP 12" Powered Line Array Loudspeaker Pair with FREE Carry Bags and Mogami XLR Cables

Skip to the end of the images gallery
Skip to the beginning of the images gallery
Be the first to review this product
$6,450.40
Details More Information Reviews

JBL VRX932LAP 12" 2-Way Powered Line Array Loudspeaker System

  • Power Rating : 1750 Watts Peak, 875 Watts Continuous
  • Frequency Range : 57 Hz - 20 kHz, (-10 dB)
  • Dimensions (H x W x D) : 349 mm x 597 mm x 444 mm, (13.75 in x 23.5 in x 17.5 in)
  • Frequency Response : 75 Hz - 20 kHz, (+/-3db)
  • Maximum Peak Output : 136 dB SPL at 1m
  • Coverage Pattern : 100 x 15 nominal
  • DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) : LF: 750 Watts, HF: 125 Watts
  • DPC-2 Output Sectoin : LF: Dual-Bridged Technology™, Class D
  • Audio Input Connector : XLR with loop through
  • LF Driver : 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
  • HF Driver : 3 x JBL 2408J, 38 mm (1.5 in)
  • User Controls : Input Attenuator (0-16 dB)
  • Signal Processings : DSP based, resident in Input Module
  • AC Power Operating Range : 90-132 VAC or 216-264 VAC, 50/60 Hz
  • AC Input Connector : Neutrik PowerCon (NAC 3MPA)
  • AC Loop Through Connector : Neutrik PowerCon (NAC 3MPB)
  • AC Current Requirements : 6A per system at 120V, 3A per system at 240V
  • Enclosure : 25/15 mm, 11-ply birch plywood
  • Suspension / Mounting : Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
  • Finish : Black DuraFlex™ finish
  • Grille : Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
  • Optional Accessories : VRX-AF: Suspension array frame
  • Net Weight : 24 kg (52 lb)

 

Mogami Gold Stage XLR Male to XLR Female Microphone Cable - 30 ft

High Quality Balanced Microphone Cable

Neglex Type #22AWG Balanced Microphone Cable


W2549 has been designed using our famous Neglex OFC to provide the highest quality audio reproduction in any recording application. It features #22AWG conductors and extremely low capacitance. The 100% coverage served shield and twisted pair construction is excellent at preventing noise caused by electromagnetic interference. This cable is recommended when extended high frequencies are important or where long cable runs may be needed. 

Part No. W2549
Conductor Size (mm²) 0.339mm² (#22AWG)
O.D. (mm) 6.0ø (0.236")
Flex Life 14,500 cycles
Tensile Strength 657 N
Colors Black / Red / Yellow / Green / Blue


Excellent for rugged remote and on stage use in Sound Reinforcement, TV, Radio broadcasting etc. Its compact size together with a heavy duty binder and filler system and a braided shield make it ideal for all continuous handling applications. Exhibits very low microphonic pick - up and can operate at very cold temperatures down to -20#176;C (-4#176;F) without losing its flexibility. 105 strands of 44AWG annealed bare copper features ultra flexibility with extraordinary flex life, while maintaining excellent strength characteristics.

Part No. W2791
Conductor Size (mm²) 0.206mm² (#24AWG)
O.D. (mm) 5.5ø (0.217")
Flex Life 131,000 cycles
Tensile Strength 578 N
Colors Black / Red / Yellow / Green / Blue
Braided Shield Coverage: over 95%


SPECIFICATIONS

Configuration Diagram w2549d Diagram w2791d
Part No. W2549 W2791
No. of Conductor 2
Conductor Details 30/0.12 OFC 105/0.05 A
Size(mm²) 0.339mm² (#22 AWG) 0.206mm² (#24 AWG)
Insulation Ov. Dia.(mm) 1.9Ø (0.075") 1.5Ø (0.059")
Material XLPE (Cross-Linked Polyethylene)
Colors Blue / Clear Red / Clear
Shield Served Approx. 64/0.18A Braid 0.10A/9/16
Jacket Ov. Dia.(mm) 6.0Ø (0.236") 5.5Ø (0.217")
Material Flexible PVC Flexible PVC
Colors Black / Red / Yellow / Green / Blue Black / Red / Yellow / Green / Blue
Roll Sizes 50m (164 Ft)
100m (328Ft)
200m (656Ft)		 50m (164 Ft)
100m (328Ft)
200m (656Ft)
Weight per 200m Roll 11kg 9kg



ELECTRICAL & MECHANICAL CHARACTERISTICS

Part No. W2549 W2791
DC Resistance at 20°C Inner Cond. 0.058Ω/m(0.018Ω/Ft) 0.09Ω/m(0.027Ω/Ft)
Shield 0.013Ω/m(0.004Ω/Ft) 0.002Ω/m(0.006Ω/Ft)
Capacitance at 1kHz, 20°C
(Partial C. Value)
See below figure*		 K0 76pF/m(23pF/Ft) 86pF/m(26pF/Ft)
K1 11pF/m(3.4pF/Ft) 10pF/m(3.1pF/Ft)
Inductance between conductors at 1kHz. 20°C 0.8µH/m(0.24µH/Ft) 0.8µH/m(0.24µH/Ft)
Electrostatic Noise** 50mV Max. 250mV Max.
Electromagnetic Noise** 0.15mV Max. 0.15mV Max.
Microphonics at 50KΩ Load** 30m V Max. 30m V Max.
Voltage Breakdown Must withstand at DC 125V/15sec.
Insulation Resistance 100000 M Ω × m Min. at DC 125V, 20°C
Flex Life** 14,500 cycles 164,000 cycles
Tensile Strength 657N 578N
Emigration Non-emigrant to ABS Non-emigrant to ABS
Applicable Temperature -20°C‾ +70°C(-4°F‾ +158°F)

 Manufacturer's Description

JBL VRX932LAP 12" 2-Way Powered Line Array Loudspeaker System

12 in. Two-Way Powered Line Array Loudspeaker System
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
 

Features

  • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
  • JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
  • VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
  • Constant Curvature waveguide for unprecedented array coherence.
  • Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
  • Array Configuration Selector permits "array shading".

 

JBL VRX932LAP-BAG Padded Protective Carry Bag for VRX932LAP Speaker

Features

  • The ultimate padded carry bag for the VRX932LAP.
  • Cover constructed of 1200D Nylon with waterproof backing.
  • 10mm padding and a soft Tricot fabric interior provide complete protection.
  • Exterior lifting handles with Velco wrap allow for superior mobility and functionality.
  • Large external storage pocket with 1" gusset provides generous storage space.
  • Includes provision for fastening (2x) VRX928LAP-BAG to a VRX Sub to create the ultimate mobile system.
  • Embroidered JBL Logo.
  • Black Exterior.

 

Mogami Gold Stage XLR Male to XLR Female Microphone Cable - 30 ft

This ultra-rugged, "roadie proof" cable offers killer sound for active stage performers. Separating Mogami Gold Stage from other cable brands is unique cable cores with three times the number of copper strands compared to a typical high quality cable. The higher the stranding the less likely the cable is to break when handled. Two of these 105 strand cores are covered with a comprehensive full-coverage braided shield. This forms the basis of a nearly indestructible, yet highly flexible cable that offers transparency and accuracy unequaled by other brands.

Features

  • Conductor insulation is XLPE (Cross-Linked Polyethylene) which has excellent electrical characteristics and prevents shrink-back during soldering
  • Braided shielding makes Mogami Gold more durable
  • For stage and broadcast, Mogami Gold Stage is extremely durable, a valuable feature on stage where cables tend to be abused
  • Lifetime warranty

 

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, reproductive, and developmental harm. For more information, visit www.p65warnings.ca.gov