Focusrite Scarlett OctoPre 8-Channel Mic Pre with ADAT Connectivity
- Supported Sample Rates
- 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Microphone Inputs
- Frequency Response 20Hz - 20kHz +0.5/-1.5dB
- Dynamic Range 109 dB (A-Weighted)
- THD+N <0.001%
- Noise EIN -127 dBu
- Maximum input level (without pad) +8 dBu
- Maximum input level (with pad) +16 dBu
- Gain Range 50 dB
- Input Impedance 3 kΩ
- Line Inputs
- Frequency Response 20Hz - 20kHz +0.5/-1.5dB
- Dynamic Range 109 dB (A-Weighted)
- THD+N <0.002%
- Maximum input level +22 dBu
- Gain Range 50 dB
- Input Impedance 49 kΩ
- Instrument Inputs
- Frequency Response 20Hz - 20kHz +0.5/-1.5dB
- Dynamic Range 108 dB (A-Weighted)
- THD+N <0.01%
- Maximum input level +13 dBu
- Gain Range 50 dB
- Input Impedance 1 MΩ
- Line Outputs
- Maximum Output Level (0 dBFS) +16dBu @ 0dBFS, or >21dBu where ADAT output is not used
- THD+N <0.001%
- Ouput Impedance 136 Ω (Balanced)
- Red 2 & 3 Plug-In Suite is included as a free download.
- Softube Time & Tone Bundle is included as a free download.
Manufacturer's Description
The Sound of Scarlett - and more of it
Scarlett OctoPre gives you eight additional inputs. It's the ideal way to expand your Scarlett - or any other interface with an ADAT input.
Eight Scarlett 2nd Generation mic preamps
Scarlett OctoPre features eight 2nd Generation Scarlett mic inputs - balanced line inputs too - all running through Focusrite precision 24-bit conversion at up to 192 kHz resolution with 109dB dynamic range.
Dual front-panel instrument inputs
Two high-headroom instrument inputs will handle high output guitar pickups and are right there on the front panel for easy access.
Plenty of headroom. Pads for the most extreme inputs
With high-headroom inputs and a pad on every channel, Scarlett OctoPre is ideal for tracking drums as well guitars, keyboards, vocals - and more.
Outputs for live or stand-alone use
Eight balanced line outputs, sourced directly from the inputs allow Scarlett OctoPre to be used in a live situation whilst capturing the recording via the digital ADAT output.
About ADAT
ADAT is a simple and easy way of expanding your analogue inputs. ADAT uses inexpensive "light-pipe" optical cables to carry up to eight channels of audio. Just connect the ADAT output on the OctoPre to the ADAT input on your interface, set your sample rate and clock source and you're ready to go. ADAT input is available on many Focusrite and third-party interfaces.
Need D-A/Outputs as well as Inputs? Compression?
If you need more inputs as well as more outputs check out the Scarlett OctoPre Dynamic - everything you see here, plus eight channels of pristine D-A conversion and analogue compression on every input. It might be just what you're looking for.
Three Month Avid® Pro Tools® Artist Subscription with Complete Plugin Bundle
A three-month subscription to Avid Pro Tools Artist and Avid Complete Plugin Bundle, with a 25% discount on Avid Pro Tools Artist after the subscription period, or a 33% discount on Avid Pro Tools Studio.
Landr Studio, plus five free masters
Produce and release your best work with two months' access to Landr Studio, as well as five free masters you can use even when your two months subscription is over.