Fender Classic Series 70's Jazz Bass Replacement Neck, 20 Medium Jumbo Frets, Block Inlay, Pau Ferro

Manufacturer's Description

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

Features

• 7.25"-radius pau ferro fingerboard
• "C"-shaped neck profile
• 20 medium-jumbo frets; block inlays
• Pre-slotted synthetic bone nut
• Gloss urethane finish

Fender®, Squier®, Stratocaster®, Telecaster®, Precision Bass®, Jazz Bass® and the distinctive headstock designs commonly found on the Strat®, Tele® & P Bass® guitars are registered trademarks of Fender Musical Instruments Corporation

Specifications

General

• Color: Natural
• Instrument Type: Jazz Bass®
• Orientation: Right-Hand
• Product Name: Classic Series 70's Jazz Bass® Neck, 20 Medium Jumbo Frets, Block Inlay, Pau Ferro
• Series: Necks

Neck

• Fingerboard Material: Pau Ferro
• Fingerboard Radius: 7.25" (184.1 mm)
• Neck Finish: Gloss Urethane
• Neck Material: Maple
• Neck Mounting: 4-Bolt
• Neck Shape: '70s "C"
• Neck Thickness: 2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
• Number of Frets: 20
• Nut Material: Synthetic Bone
• Nut Width: 1.5" (38.1 mm)
• Position Inlays: Pearloid Block
• String Nut: Synthetic Bone
• Truss Rod: Standard
• Truss Rod Nut: Bullet Style

Hardware

• Tuner Mounting Config: Vintage-Style 4-Screw

Measurements

• Fret Size: Vintage-Style
• Fret Wire Dimensions: 0.084" (H) x 0.039" (W)
• Headstock Thickness: .540” (13.71 mm)
• Peg Hole Diameter: .625” (15.87 mm)
• Scale Length: 34" (86.36 cm)

Miscellaneous

• Style: Vintage-Style