Skip to content
SKU BU-ART-PROCHANNELII-CABLES

ART Pro Audio ProChannel II Strip w/ 2x Mogami XLR Cables

$462.99

Manufacturer's Description

ART Pro Audio ProChannel II Strip

The ART Pro Channel II™ uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

The ART Pro Channel II™ 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.

Features

  • Fully Featured discrete class "A" Tube Microphone Preamplifier
  • 1/4" High Z input on the front panel
  • Selectable plate Voltage
  • Smooth musical sounding Optical Compressor
  • Separate Attack and Release controls
  • Auto/Manual Attack/Release switch
  • Parametric EQ
  • Large VU and LED meters
  • Multi section clip monitor LED
  • Selectable Source switches for VU signal monitoring of any section of the unit
  • Two insert loops
  • +4/-10 dB switch for optimal signal output levels
  • Toroidal power transformer for low noise

Mogami CorePlus Microphone Cable, XLR Male to XLR Female - 10 ft

Mogami's legendary performance has been the choice of the best studios and touring artists for many years. CorePlus™ features carefully chosen cables and connectors for true Mogami quality, engineered for more price conscious professionals.

Features

  • Exclusive Ultra High Density Spiral Shield eliminates noise
  • Low Noise Cross Link Polyethylene insulation improves clarity
  • Conductive Polymer co-insulation eliminates handling noise
  • Excellent results with low or high impedance equipment

Specifications

ART Pro Audio ProChannel II Strip

  • Input Impedance
    • Mic: 150 to 3.4K Ohms, variable
    • Instrument: 2.5M Ohms
    • Preamp Insert: .5K Ohms
  • Output Impedance
    • Balanced Output: 600 Ohms balanced
    • Unbalanced Output: 300 Ohms
    • Insert Outputs: 300 Ohms
  • Frequency Response
    • Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
    • THD @ 1 KHz: <0.15% typical
    • THD @ to to 20 KHz: <0.033% typical
  • Equivalent Input Noise
    • Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
    • Instrument: -109 dBu, Input shortened, Max gain, "A" weighted
  • Maximum Input Level
    • Mic: +18dBu balanced
    • Instrument: +15 dBu
  • Maximum Gain
    • Mic: 70dB (XLR to balanced output)
    • Instrument: 64 dB (1/4" to balanced output
  • Maximum Output Level
    • Balanced: +24 dBu
    • Unbalanced: +20 dBu
    • Output Level At Meter 0 VU: +4 dBu/-10dBV
  • Preamp
    • Microphone Gain: 0 dB to +56 dB
    • Instrument Gain: +3 dB to +50 dB
    • Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
  • EQ
    • Boost/Cut: +/- 12 dB on each band
    • Low Freq. Tuning: 40 / 120 Hz Selectable
    • MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
    • MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
    • High Freq. Tuning: 6 KHz / 18 KHz Selectable
  • Compressor / Limiter
    • Attack Time: 250 uSec. to 100 mSec.
    • Release Time: 00 mSec to 3 Sec.
    • Compression Ratio: 2:1 to 30:1
    • Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
    • Dimensions (cm): 8.9 x 48.3 x 23.3
    • Weight (lbs/kg): 11/5
    • Power Requirements: USA - 105 to 125 VAC/ 60 Hz
    • Export units configured for country of destination.
    • Note: 0 dBu = 0.775 VRMS, 0 dBV