Skip to content
SKU BU-AT-2035-1

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone Studio Bundle

$169.00

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone Studio Bundle

$169.00

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone

  • Element: Fixed-Charge Back Plate, Permanently Polarized Condenser

  • Polar Pattern: Cardioid

  • Frequency Response: 20-20,000 Hz

  • Low Frequency Roll-Off: 80 Hz, 12 dB/Octave

  • Open Circuit Sensitivity: -33 dB (22.4 Mv) Re 1v At 1 Pa

  • Impedance: 120 Ohms

  • Maximum Input Sound Level: 148 dB SPL, 1 Khz At 1% T.H.D.; 158 dB SPL, With 10 dB Pad (Nominal)

  • Noise: 12 dB SPL

  • Dynamic Range (Typical): 136 dB, 1 KHz At Max SPL

  • Signal-To-Noise Ratio: 82 dB, 1 KHz At 1 Pa

  • Phantom Power Requirements: 11-52v DC, 3.8 Ma Typical

  • Switches: Flat, Roll-Off; 10 dB Pad (Nominal)

  • Weight: 403 G (14.2 Oz)

  • Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter

  • Output Connector: Integral 3-Pin XLRM-Type

  • Accessories Furnished: AT8458 Shock Mount For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch

  • Audio-Technica Case Style: R5

 Manufacturer's Description

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone Studio Bundle

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Features

  • Large diaphragm for smooth, natural sound and low noise

  • High SPL handling and wide dynamic range provide unmatched versatility

  • Custom shock mount provides superior isolation

  • Switchable 80 Hz high-pass filter and 10 dB pad

  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

  • Includes custom shock mount & protective pouch

 

Samson MK10 Lightweight Boom Microphone Stand

The MK10 Microphone Boom Stand combines the crucial elements of lightweight durability with an attractive and functional design. It comes a very small package that folds up easily for transport anywhere you need it.

Features

  • Collapsible tripod boom stand
  • Sturdy steel construction
  • Sleek black finish
  • Ultra-light for easy transport
  • Includes mic clip

 

Strukture Pro20M7 Heavy Duty, 7mm Rubber Microphone Cable - 20 ft

We selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.

Features

  • High quality 7mm rubber outer covering
  • State-of-the-art shrink-wrap sleeve
  • Thick ABS sleeve protects solder connections
  • Lifetime guarantee

 

 

Neewer PS-1 Studio Microphone Pop Filter

 

The Neewer PS-1 is a studio microphone wind screen pop filter. This double layer filter is convenient and easy use for reducing sibilance and plosives in your vocal tracks.

 

Features:

* Protects your studio microphone.
* 360 degree flexible gooseneck holder, convenient for positioning.
* Swivel mount for easy installation.
* Adjustable clamp fixes securely to any mic stand.
* Goose neck for precise positioning.
* Commonly used in a recording studio.

Package contents:
1x Studio Microphone Mic Wind Screen Pop Filter