Skip to content
SKU BU-PG200-PHM10-AT4040

Audio Technica AT-4040 Microphone With Popguard & 10' Microphone Cable Bundle

$328.90

Audio Technica AT4040 Cardioid Condenser Microphone

  • Element: Externally-polarized (DC bias) condenser
  • Polar Pattern: Cardioid
  • Frequency Respnose: 20 - 20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
  • Impedance: 100 Ohms
  • Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
  • Noise: 12 dB SPL
  • Dynamic Range (typical): 133 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 48V DC, 4.2 mA typical
  • Switches: Flat, Roll-Off, 10 dB pad (nominal)
  • Weight: 12.7oz (360 g)
  • Dimensions: 6.69" (170.0 mm) long; 2.10" (53.4 mm) maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories furnished: AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
  • Audio-Technica Case Style: R1

 Manufacturer's Description

Audio Technica AT4040 Cardioid Condenser Microphone

The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects.

Features:

  • Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
  • Externally polarized (DC bias) true condenser design
  • Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz hi-pass filter and 10 dB pad

 

 

Windtech PopGard Microphone Windscreen

After more than two years in development, the PopGard™ is the next generation in microphone protection. The PopGard™ Model PG-2000 microphone pop screen offers excellent protection against plosive sounds in side address microphones in studio and broadcast applications. In addition, the PopGard™ is hydrophobic, helping to prevent moisture from reaching the microphone element while remaining acoustically transparent. Weighing less than one ounce, the PopGard™ is easy to clean and attaches in seconds to most side address microphones from 1.8" to 2.7" (46mm to 68mm) in diameter. There is no need for clamps or goosenecks to mount, the PopGard™ easily attaches to the microphone body using lightweight elastic bands. This mounting method allows the PopGard™ to move with the
microphone without constant adjustment. The Ultimate Microphone Pop Filter.

 Microphone Models Compatible with the PopGard™ PG2000

AKG: C 2000 B, C 214, C 414, Perception 420, C414XL II, Perception 120, Perception 220
  Perception 120 USB, Perception 820 Tube, C 12 VR.
Apex: 205, 210, 250, 415, 435, 460, 480, 520, 530, 540, 550
Aphex: Microphone X.
Apogee: MiC.
Audio Technica: AT 5040, 2020, 2035, 2050, 4033, 4040, 4047, 4050, 4060, R2500, 4080, 5040.
Audix: CX-111, CX-112B, CX212B.
Avantone: CV28, CK6, CR14, CK40, CK7, CV12, BV-12, BV-1.
Avlex R102.
Behringer: C-1, C-3, B-2 Pro, C-1U, B-1.
Blue: Cactus, Kiwi, Reactor, Woodpecker, Blueberry, Baby Bottle, Bluebird, Spark.
Bock Audio: 195, 241, 251, 507, IFET, 4-ZERO-7, 5-ZERO-7.
CAD: E100S, E300S, Trion 8000, GLX 3000BP, GLX2200BP, GLX3000, GLX 2400, GLX2200, M179.
Cascade: Ribbon Series, Fat Head, Gomez
Lauten Audio: Atlantis FC-387, Horizon.
Lewitt: LCT 240, LCT 540, LCT 640, LCT 840, LCT 940.
Manley: Reference Cardioid, Gold Reference.
Miktek: CV 4, MK 7.
Mohave Audio: MA-200, MA-201fet, MA-300.
MXL: Genesis, CR89, CR30, Temple XLR, Revelation, Gold 35, CX22, V177, V89, 88, 87, 69, 67, 76, 2010, 2003,
  2006, 2008, 2001, 770, 440, BCC–1,  BCD–1, R77, R144, R150, 870, 880, 890, 910, 920, V63M, 3000, 4000,
  V900, 9090, 9000, 960, 909, 190, 992, 990.
Nady: RSM-1, RSM-4, RSM-5, TRM-6, SCM0800, SCM-900, SCM-960, SCM-1000, SCM-2090, CM-2S.
Neumann: BCM 104, 705. D-01, M147, TLM102, TLM103, TLM170, TLM193, TLM67, U87, U89i, USM69i.
Peavey: Studio Pro M1, Studio Pro M2.
Peluso: 22 47, 22 51, 22 251, P-12, P-67
Rode: NT1-A, NT 1000, NT2-A, NT 2000, K2, NTK, Classic II, Podcaster.
Samson: C01, C01U, CO2, CO3, CL2, CL5N, CL7, CL8, Meteor Mic, MTR101, MTR 201, MTR231, G Track.
Se: G3500, Magneto, X1, 2200, 4400, Titanium, VR1, VR2.
Sennheiser: MK4, MK8, e609, e906.
Shure: KSM42, 44, 32, 313, 353. Beta 27, 181. PG 27, PG42USB, SM27.
Sony: C-800G.
Sterling: ST51, ST55, ST59, ST6050, ST66, ST69, ST77, ST79.
Studio Projects: B1, LSM, CS56, B3, C1, T3.
Telefunken: ELA M 215 E, AR51, CU-29, ELA M260, AK47, AR70, C12, U47.

 

 

Pig Hog PHM10 8mm Microphone XLR Cable 10ft

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

  • High performance microphone cable
  • 8mm high quality rubber outer covering
  • Heat shrink protected connectors
  • Lifetime guarantee