Audio Technica AT-2020 Microphone With Popguard, 10' XLR Cable, Dust Cloth Bundle
Audio Technica AT2020 Cardioid Condenser Microphone
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar pattern: Cardioid
- Frequency response: 20-20,000Hz
- Open circuit sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum input sound level: 144dB SPL, 1kHz at 1% THD
- Noise: 20dB SPL
- Dynamic range (typical): 124dB, 1kHz at Max SPL
- Signal-to-noise ratio: 74dB, 1kHz at 1 Pa
- Phantom power requirements: 48V DC, 2 mA typical
- Weight: 12.1 oz.
- Dimensions: 6-1/3" long, 2" diameter
- Output connector: 3-pin XLRM-type
- Included accessories: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica case style: R7
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
- Cardioid pattern
- Side address
- 16mm low-mass diaphragm
- 20Hz-20kHz frequency response
- 144dB SPL handling
- Rugged body
Windtech PopGard Microphone Windscreen
After more than two years in development, the PopGard™ is the next generation in microphone protection.
The PopGard™ Model PG-2000 microphone pop screen offers excellent protection against plosive sounds
in side address microphones in studio and broadcast applications. In addition, the PopGard™ is
hydrophobic, helping to prevent moisture from reaching the microphone element while remaining
acoustically transparent. Weighing less than one ounce, the PopGard™ is easy to clean and attaches in
seconds to most side address microphones from 1.8" to 2.7" (46mm to 68mm) in diameter. There is
no need for clamps or goosenecks to mount, the PopGard™ easily attaches to the microphone body
using lightweight elastic bands. This mounting method allows the PopGard™ to move with the
microphone without constant adjustment. The Ultimate Microphone Pop Filter.
Microphone Models Compatible with the PopGard™ PG2000
AKG: C 2000 B, C 214, C 414, Perception 420, C414XL II, Perception 120, Perception 220
Perception 120 USB, Perception 820 Tube, C 12 VR.
Apex: 205, 210, 250, 415, 435, 460, 480, 520, 530, 540, 550
Aphex: Microphone X.
Audio Technica: AT 5040, 2020, 2035, 2050, 4033, 4040, 4047, 4050, 4060, R2500, 4080, 5040.
Audix: CX-111, CX-112B, CX212B.
Avantone: CV28, CK6, CR14, CK40, CK7, CV12, BV-12, BV-1.
Behringer: C-1, C-3, B-2 Pro, C-1U, B-1.
Blue: Cactus, Kiwi, Reactor, Woodpecker, Blueberry, Baby Bottle, Bluebird, Spark.
Bock Audio: 195, 241, 251, 507, IFET, 4-ZERO-7, 5-ZERO-7.
CAD: E100S, E300S, Trion 8000, GLX 3000BP, GLX2200BP, GLX3000, GLX 2400, GLX2200, M179.
Cascade: Ribbon Series, Fat Head, Gomez
Lauten Audio: Atlantis FC-387, Horizon.
Lewitt: LCT 240, LCT 540, LCT 640, LCT 840, LCT 940.
Manley: Reference Cardioid, Gold Reference.
Miktek: CV 4, MK 7.
Mohave Audio: MA-200, MA-201fet, MA-300.
MXL: Genesis, CR89, CR30, Temple XLR, Revelation, Gold 35, CX22, V177, V89, 88, 87, 69, 67, 76, 2010, 2003,
2006, 2008, 2001, 770, 440, BCC–1, BCD–1, R77, R144, R150, 870, 880, 890, 910, 920, V63M, 3000, 4000,
V900, 9090, 9000, 960, 909, 190, 992, 990.
Nady: RSM-1, RSM-4, RSM-5, TRM-6, SCM0800, SCM-900, SCM-960, SCM-1000, SCM-2090, CM-2S.
Neumann: BCM 104, 705. D-01, M147, TLM102, TLM103, TLM170, TLM193, TLM67, U87, U89i, USM69i.
Peavey: Studio Pro M1, Studio Pro M2.
Peluso: 22 47, 22 51, 22 251, P-12, P-67
Rode: NT1-A, NT 1000, NT2-A, NT 2000, K2, NTK, Classic II, Podcaster.
Samson: C01, C01U, CO2, CO3, CL2, CL5N, CL7, CL8, Meteor Mic, MTR101, MTR 201, MTR231, G Track.
Se: G3500, Magneto, X1, 2200, 4400, Titanium, VR1, VR2.
Sennheiser: MK4, MK8, e609, e906.
Shure: KSM42, 44, 32, 313, 353. Beta 27, 181. PG 27, PG42USB, SM27.
Sterling: ST51, ST55, ST59, ST6050, ST66, ST69, ST77, ST79.
Studio Projects: B1, LSM, CS56, B3, C1, T3.
Telefunken: ELA M 215 E, AR51, CU-29, ELA M260, AK47, AR70, C12, U47.
Pig Hog PHM10 8mm Microphone XLR Cable 10ft
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!
- High performance microphone cable
- 8mm high quality rubber outer covering
- Heat shrink protected connectors
- Lifetime guarantee