Skip to content
SKU ART-PROCHANNELII

ART Pro Audio ProChannel II Strip

Skip to the end of the images gallery
Skip to the beginning of the images gallery
Be the first to review this product
$459.99
Details More Information Reviews

Input Impedance

  • Mic: 150 to 3.4K Ohms, variable

  • Instrument: 2.5M Ohms

  • Preamp Insert: .5K Ohms

Output Impedance

  • Balanced Output: 600 Ohms balanced

  • Unbalanced Output: 300 Ohms

  • Insert Outputs: 300 Ohms

Frequency Response

  • Analog In to Analog Out: 12Hz to 100KHz +0, -1dB

  • THD @ 1 KHz: <0.15% typical

  • THD @ to to 20 KHz: <0.033% typical

Equivalent Input Noise

  • Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted

  • Instrument: -109 dBu, Input shortened, Max gain, "A" weighted

Maximum Input Level

  • Mic: +18dBu balanced

  • Instrument: +15 dBu

Maximum Gain

  • Mic: 70dB (XLR to balanced output)

  • Instrument: 64 dB (1/4" to balanced output

Maximum Output Level

  • Balanced: +24 dBu

  • Unbalanced: +20 dBu

  • Output Level At Meter 0 VU: +4 dBu/-10dBV

Preamp

  • Microphone Gain: 0 dB to +56 dB

  • Instrument Gain: +3 dB to +50 dB

  • Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave

EQ

  • Boost/Cut: +/- 12 dB on each band

  • Low Freq. Tuning: 40 / 120 Hz Selectable

  • MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable

  • MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable

  • High Freq. Tuning: 6 KHz / 18 KHz Selectable

Compressor / Limiter

  • Attack Time: 250 uSec. to 100 mSec.

  • Release Time: 00 mSec to 3 Sec.

  • Compression Ratio: 2:1 to 30:1

  • Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2

  • Dimensions (cm): 8.9 x 48.3 x 23.3

  • Weight (lbs/kg): 11/5

  • Power Requirements: USA - 105 to 125 VAC/ 60 Hz

    Export units configured for country of destination.

Note: 0 dBu = 0.775 VRMS, 0 dBV = 1 VRMS

Manufacturer's Description

The ART Pro Channel II™ uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.The ART Pro Channel II™ 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.

Features

  • Fully Featured discrete class "A" Tube Microphone Preamplifier

  • 1/4" High Z input on the front panel

  • Selectable plate Voltage

  • Smooth musical sounding Optical Compressor

  • Separate Attack and Release controls

  • Auto/Manual Attack/Release switch

  • Parametric EQ

  • Large VU and LED meters

  • Multi section clip monitor LED

  • Selectable Source switches for VU signal monitoring of any section of the unit

  • Two insert loops

  • +4/-10 dB switch for optimal signal output levels

  • Toroidal power transformer for low noise