American DJ Mega Tripar Profile Plus With DMX Cables & O-Clamps Bundle

American DJ Mega Tri Profile Plus LED Par

• Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad LEDs
• Smooth RGB + UV Color Mixing (fast or slow color change operation)
• Unique “sit-flat” design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss
• Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
• 5 DMX Channel modes: 4, 5, 6, 9 or 10 channel modes
• 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGB + UV Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled
• Digital DMX Display with 4-button menu for easy navigation
• Stand Alone or Master/Slave Configuration
• Beam Angle: 40 degrees
• 64 built-in Color Macros
• DMX-512 protocol
• Color strobe effect
• Linkable via 3-pin XLR cable
• Electronic Dimming: 0-100%
• Flicker Free
• Includes a scissor yoke to hang on truss, mount on a wall or set on the ground
• Long Life LEDs (50,000 hrs.)
• Power Draw: 21W Max
• IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures)
• Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (sold separately)
• Multi-voltage operation: AC 100V-240V 50/60Hz
• Dimensions (LxWxH): 8.75”x8.75”x3.25”/ 225x220x85mm
• Weight: 2.7 lbs./ 1.23 kg.

ADJ O-Clamp 1.5 - 1.5" diameter

• 360 degree clamp that wraps around truss tubing
• Securely mounts fixtures to truss
• Non scuffing - Non scratching - Non scoring - Non denting
• Works great for the ADJ LTS-1, LTS-2, and LTS-30 lighting stands
• Weight limit: 28 lbs./13 kg.

• O-Clamp 1.5: Fits 1.5-inch Truss when using the supplied adapter

Manufacturer's Description

American DJ Mega Tri Profile Plus LED Par

The ADJ Mega Tripar Profile Plus is a compact, low profile par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique “sit-flat” design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear.

The Mega Tripar Profile Plus features 5 x 4-Watt, 4-N-1 RGB + UV LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGB + UV Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega Tripar Profile Plus.

ADJ O-Clamp 1.5 - 1.5" diameter

The O-Clamp from ADJ is a 360 degree clamp that wraps around truss tubing. It's designed to securely mount fixtures to truss. Bring safety and stability to your performance with this clamp. It tightens down securely to ensure you get that locked in feel.

A great performing clamp at a value price. This clamp when used with the appropriate truss will not let you down. It’s available in 3 different sizes. Make sure to always make safety the first part of your show. If you don't have your pieces clamped down then you could risk everything. Add the ADJ O-Clamp to your toolbox and keep your mind at ease.

ADJ American DJ Accu-Cable 3-Pin DMX Cable - 15 ft

22 AWG stranded (0.15 x 19 ) tinned copper conductors, polyethylene insulation, twisted pair, polyethylene inner jacket, Duofoil® (100% coverage) and cotton plus a tinned copper braid shield (85% coverage), PVC jacket. 

Features

• Conductor: Number of Pairs: 1
• Total Number of Conductors: 2
• AWG: 22
• Stranding: 0.15 x 19
• Conductor Diameter: .0354"
• Conduct or Material: TC-Tinned Copper 
•  Insulation: Insulation Material PE Polyethylene 
•  Lay Length: 2.5"
• Direction: Left Hand Lay
• Twists: 4.8 per foot 
• Inner Jacket Material: PE- Polyethylene
• Inner Jacket Diameter: .055"
• Pair Color Code: Black/White
• Outer Shield Trade Name: Duofoil®
• Outer Shield Type: Tape/Braid
• Layer Number:1, Material Trade Name: Dufoil®, Type: Tape, Material: Aluminum Foil-Polyester, Coverage %: 100
• Layer Number: 2, Material Trade Name: Dufoil®, Type: Braid, Material: TC-Tinned Copper, Coverage %: 85
• Outer Jacket Material: PVC-Polyvinyl Chloride
• Overall Nominal Diameter: .229"
• Operating Temperature Range: (-30 degrees C To + 75 degrees C)
• Bulk Cable Weight: 31 lbs/1000
• Minimum Bend Radius (Install): 3.2"
• Maximum Recommended Pull Tension: 72 lbs.
• Nominal Characteristic Impedence: 110 Ohms
• Nominal Capacitance Conductor to Conductor @ 1KHz: 12.8 pF/f t
• Nominal Cap Cond. To Other Cond. & Shield @ 1KH z: 23 pF/ft
• Nominal Velocity of Propagation: 66%
• Nominal Delay: 1.6 Nanoseconds per foot
• Nominal Conductor DC Resistance @ 20 degrees C: 24 Ohms/1000 ft
• Nominal Outer Shield D C Resistance @ 20 degrees C: 3.4 Ohms/ 1000 ft
• Nominal Attenuation (dB/100 ft): 0.6 (@ 1 MH z) dB/100 ft
• Maximum Recommended Current: 2.1 A mps per conductor @ 25 degree C