Skip to content
SKU BU-ADAM-T7V-T10S

Adam Audio T7V T-Series Active Nearfield Studio Monitor Pair w/ T10S Subwoofer

$799.99

Manufacturer's Description

Adam Audio T10S Active Powered Studio Recording Monitoring Subwoofer, 1x10''

ADAM Audio T10S

The T10S is a powerful yet compact active subwoofer, designed to extend the bass response of any nearfield studio monitor. However, the subwoofer’s performance, features and connectivity are engineered specifically to complement ADAM Audio’s T5V and T7V speakers.

Equipped with a down-firing 10˝ woofer and a 130 W Class-D amplifier, the T10S’ frequency response ranges from 28 Hz to 120 Hz and offers an impressive max. SPL of 104 dB. An internal adjustable two-channel crossover allows calibration of the bass signal and provides optimal performance of the total system. The options at the rear of the subwoofer allow for varied adjustments which compensate for room acoustics or they offer more control for satellites attached.

While reciting the T Series design language, the T10S is one of the most compact subwoofers in its class, which allows it to be easily integrated in any studio environment. The acoustic performance was optimized by four high grade flexible rubber feet that prevent the sound from exciting the floor and a spacious rear facing bass reflex port for an optimized airflow.

Features

  • Linear bass reproduction down to 28 Hz
  • Ideal addition to smaller nearfield monitors, specifically the T Series

Adam Audio T7V T-Series Active Nearfield Studio Monitor, Single

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Sub8 subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

Features

  • U-ART 1.9” Accelerated Ribbon Tweeter
  • The air velocity ratio of 4:1 during the sound generation by folded U-ART membrane
  • HPS waveguide from the S Series
  • Lightweight polypropylene construction of the woofer
  • Vertical 2-way system with 7” woofer
  • Spacious rear-firing bass reflex port
  • Linear frequency response of 39 Hz to 25 kHz
  • Maximum peak sound pressure per pair in 1 m ≥ 110 dB
  • DSP-powered crossover design
  • Simple room acoustic adjustments via high- and low-shelf filters
  • Analog inputs over XLR and RCA
  • Acoustically optimized cabinet geometry
  • Compact cabinet dimensions

Specifications

Adam Audio T10S Active Powered Studio Recording Monitoring Subwoofer, 1x10''

Subwoofer (down-firing)

  • Number: 1
  • Basket Ø: 10"" (260 mm)
  • Voice Coil Ø: 38mm / 1.5""
  • Cone Material: Paper

Built-in Amplifiers

  • Subwoofer: 1
  • Type: PWM
  • Amp. Power RMS: 130 W

Control Panel

  • Crossover Frequency: 80 Hz / 120 Hz / Bypass
  • Phase Inversion: 0° / 180°

Connectors

  • Analog Inputs: XLR / RCA
  • Analog Outputs: XLR / RCA

General Data

  • Frequency Response: 28 Hz - 120 Hz (@ -6 dB)
  • THD > 60 Hz: 0.6%
  • Max. SPL at 1 m (hemisphere): ≥104 dB
  • Max. Power Consumption: 190 W
  • Input Sensitivity: +4 dBu / -10 dBV
  • Panel: Rear
  • Bypass: Yes, via footswitch (not included)
  • Standby: Yes, activates after 15 minutes with no incoming signal
  • Weight: 27 lb (12.2 kg)
  • Height x Width x Depth: 15.4"" (390 mm) x 12.5"" (318 mm) x 16.25"" (413 mm)
  • Warranty: 5 years (2 years warranty plus 3 years optional with product
  • registration) (2 years warranty plus 3 years optional with product registration)
  • Delivery Contents: Power cord, Quick Start Guide, Welcome Card

Adam Audio T7V T-Series Active Nearfield Studio Monitor, Single

Woofer     

  • Number :  1
  • Basket Ø :  7"" (178 mm)
  • Cone Material :  Polypropylene

Tweeter

  • Number :  1
  • Type :  U-ART
  • Diaphragm Area :  4 inch² (2420 mm²)
  • Equiv. Diaphragm Ø :  1.9"" (48 mm)
  • Velocity Transform Ratio :  0.167361111111111
  • Diaphragm Weight :  0.17 g
  • Waveguide :  HPS

Built-in Amplifiers

  • Number :  2
  • Woofer :  1
  • Type :  PWM
  • Amp. Power RMS :  50 W
  • Tweeter :  1
  • Type :  PWM
  • Amp. Power RMS :  20 W


Control Options

  • Input Sensitivity :  Switchable +4 dBu / -10 dBV
  • Gain :  Yes
  • High-Shelf :  - 2 dB, 0 dB, +2 dB
  • Low-Shelf :  - 2 dB, 0 dB, +2 dB

Input Connectors

  • Analog :  XLR, RCA
  • Input Impedance :  10 kOhm / 20 kOhm

General Data

  • Panel :  Rear
  • Frequency Response :  39 Hz - 25 kHz
  • THD > 80 Hz :  0.005
  • Max. SPL per pair at 1 m :  ≥110 dB
  • Crossover Frequency :  2.6 kHz
  • Max. Power Consumption :  132 W
  • Weight :  15.7 lbs (7.1 kg)
  • Height x Width x Depth :  13.7"" x 8.3"" x 11.5” ( 347 mm x 210 mm x 293 mm)
  • Warranty :  5 years (2 years warranty plus 3 years optional with product registration)
  • Delivery Contents :  Power cord, Quick Start Guide