Skip to content
SKU BU-ADAM-T5V-T10S

Adam Audio T5V 2-Way Active Nearfield Studio Monitor Pair w/ T10S Subwoofer

$719.99

Adam Audio T5V 2-Way Active Nearfield Studio Monitor Pair w/ T10S Subwoofer

$719.99

Manufacturer's Description

Adam Audio T10S Active Powered Studio Recording Monitoring Subwoofer, 1x10''

ADAM Audio T10S

The T10S is a powerful yet compact active subwoofer, designed to extend the bass response of any nearfield studio monitor. However, the subwoofer’s performance, features and connectivity are engineered specifically to complement ADAM Audio’s T5V and T7V speakers.

Equipped with a down-firing 10˝ woofer and a 130 W Class-D amplifier, the T10S’ frequency response ranges from 28 Hz to 120 Hz and offers an impressive max. SPL of 104 dB. An internal adjustable two-channel crossover allows calibration of the bass signal and provides optimal performance of the total system. The options at the rear of the subwoofer allow for varied adjustments which compensate for room acoustics or they offer more control for satellites attached.

While reciting the T Series design language, the T10S is one of the most compact subwoofers in its class, which allows it to be easily integrated in any studio environment. The acoustic performance was optimized by four high grade flexible rubber feet that prevent the sound from exciting the floor and a spacious rear facing bass reflex port for an optimized airflow.

Features

  • Linear bass reproduction down to 28 Hz
  • Ideal addition to smaller nearfield monitors, specifically the T Series

Adam Audio T5V 2-Way Active Nearfield Studio Monitor, Single

The T5V is a highly affordable two-way nearfield monitor and optimized for small control rooms. With its 5” woofer the bass-frequency response of the T5V extends to 45 Hz. The new U-ART tweeter, a breakthrough solution for use in high-resolution recording and mixing on a budget, goes up to 25 kHz and is mated to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

A beveled cabinet with a rear-firing bass reflex port and a small footprint allows placement anywhere in your room, no matter how small, and contains built-in DSP-controlled driver crossovers and equalization as well as multi-way analog connections. Powered with a 50 W Class D amplifier for the woofer and a 20 W Class D amplifier for the U-ART tweeter, the T5V produces SPLs of up to 106 dB per pair.

Excellent acoustic characteristics, small dimensions and an outstanding cost/performance ratio make this studio monitor perfectly suited for use in small control rooms in music, video and broadcast production.If you need to hear more bottom end, the T5V is compatible with the ADAM Sub7 and Sub8 subwoofers.

Features

  • U-ART 1.9” Accelerated Ribbon Tweeter
  • The air velocity ratio of 4:1 during the sound generation by folded U-ART membrane
  • HPS waveguide from the S Series
  • Lightweight polypropylene construction of the woofer
  • Vertical 2-way system with 5” woofer
  • Spacious rear-firing bass reflex port
  • Linear frequency response of 45 Hz to 25 kHz
  • Maximum peak sound pressure per pair in 1 m ≥ 106 dB
  • DSP-powered crossover design
  • Simple room acoustic adjustments via high- and low-shelf filters
  • Analog inputs over XLR and RCA
  • Acoustically optimized cabinet geometry
  • Compact cabinet dimensions

Specifications

Adam Audio T10S Active Powered Studio Recording Monitoring Subwoofer, 1x10''

Subwoofer (down-firing)

  • Number: 1
  • Basket Ø: 10"" (260 mm)
  • Voice Coil Ø: 38mm / 1.5""
  • Cone Material: Paper

Built-in Amplifiers

  • Subwoofer: 1
  • Type: PWM
  • Amp. Power RMS: 130 W

Control Panel

  • Crossover Frequency: 80 Hz / 120 Hz / Bypass
  • Phase Inversion: 0° / 180°

Connectors

  • Analog Inputs: XLR / RCA
  • Analog Outputs: XLR / RCA

General Data

  • Frequency Response: 28 Hz - 120 Hz (@ -6 dB)
  • THD > 60 Hz: 0.6%
  • Max. SPL at 1 m (hemisphere): ≥104 dB
  • Max. Power Consumption: 190 W
  • Input Sensitivity: +4 dBu / -10 dBV
  • Panel: Rear
  • Bypass: Yes, via footswitch (not included)
  • Standby: Yes, activates after 15 minutes with no incoming signal
  • Weight: 27 lb (12.2 kg)
  • Height x Width x Depth: 15.4"" (390 mm) x 12.5"" (318 mm) x 16.25"" (413 mm)
  • Warranty: 5 years (2 years warranty plus 3 years optional with product
  • registration) (2 years warranty plus 3 years optional with product registration)
  • Delivery Contents: Power cord, Quick Start Guide, Welcome Card

Adam Audio T5V 2-Way Active Nearfield Studio Monitor, Single

WOOFER

  • Number: 1
  • Basket Ø: 5"" (127 mm)
  • Cone Material: Polypropylene

TWEETER

  • Number: 1
  • Type: U-ART
  • Diaphragm Area: 4 inch² (2420 mm²)
  • Equiv. Diaphragm Ø: 1.9"" (48 mm)
  • Velocity Transform Ratio: 4:1
  • Diaphragm Weight; 0.17 g
  • Waveguide: HPS

BUILT-IN AMPLIFIERS

  • Number: 2
  • Woofer: 1
  • Type: PWM
  • Amp. Power RMS: 50 W
  • Tweeter: 1
  • Type: PWM
  • Amp. Power RMS: 20 W

CONTROL OPTIONS

  • Input Sensitivity: Switchable +4 dBu / -10 dBV
  • Gain: Yes
  • High-Shelf: ;- 2 dB, 0 dB, +2 dB
  • Low-Shelf : - 2 dB, 0 dB, +2 dB

INPUT CONNECTORS

  • Analog: XLR, RCA
  • Input Impedance: 10 kOhm / 20 kOhm

GENERAL DATA

  • Panel: Rear
  • Frequency Response: 45 Hz - 25 kHz
  • THD > 80 Hz: 0.5 %
  • Max. SPL per pair at 1 m: ≥106 dB
  • Crossover Frequency: 3 kHz
  • Max. Power Consumption: 132 W
  • Weight: 12.6 lbs (5.7 kg)
  • Height x Width x Depth: 11.7"" x 7"" x 11.7"" (298 mm x 179 mm x 297mm)
  • Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
  • Delivery Contents: Power cord, Quick Start Guide