Turbosound iQ12 Loudspeaker Pair with iQ18B Subwoofer, Stands, Cables, and Tote Bags
This product has been discontinued.
Turbosound iQ12 - 2500-Watt 2 Way 12" Powered Loudspeaker
System
- Frequency Response : 52 Hz – 18 kHz ±3 dB, 45 Hz – 20 kHz -10 dB
- Nominal Dispersion : 80° H x 60° V @ -6 dB points
- Maximum SPL : 130 dB peak
- Crossover type : Active
- Transducers : 1 x 12" (308.5 mm) LF driver, 1 x 1" (25.4 mm) HF compression driver
- Limiter : Independent HF, LF, peak and rms
Amplifier
- Maximum output power* : 2,500 W
- Type : Class-D
- Protection : Short circuit, open circuit, thermal
Connectors
- Input A / B : 2 x combo jack/XLR
- Sensitivity : Line +4 dBu, mic -22 dBu, switchable
- Input impedance : 20 kΩ unbalanced, 40 kΩ balanced
- Maximum input level : +21 dBu
- Output A / B : 2 x XLR Linked to input
- Mix output : XLR, balanced
- Output impedance : 100 Ω unbalanced, 200 Ω balanced
- Ultranet input/link : 2 x RJ45
- Mains Supply : Neutrik powerCON input 20A and link 15A
Controls
- DSP : Rotary push-encoder Buttons for Process, Setup, Exit, Enter
- Mixer section : 2 x gain controls (channels A and B) 2 x Line/Mic switch
User DSP Functions
- Factory EQ presets : Positioning, Sound mode, Sound modeling, FBQ
- Display : LCD 128 x 32, blue backlit
- Delay : 0 - 300 ms
- Equalisation : High and low shelving EQ, 2 x parametric EQ
- Limiter : Zero attack input limiter
- Presets : 20 total presets, 19 user-definable
- Crossover : High Pass L-R 24 dB/oct
- Protection : Lock-out function for all settings
Ultranet Digital Network
System
- Signal : 16 channels
- Latency : < 0.9 ms
Cabling
- Cables : Shielded CAT5
- Cable length : max. 246 ft / 75 m recommended
Power Supply
- Power consumption : 150 W @ 1/8 max power
Voltage (fuses)
- USA / Canada : 120 V~, 60 Hz (T 15 A H 250 V)
- UK / Australia / Europe : 220-240 V~, 50/60 Hz (T 10 A H 250 V)
- Korea / China : 220-240 V~, 50/60 Hz (T 10 A H 250 V)
- Japan : 100 V~, 50/60 Hz (T 15 A H 250 V)
Enclosure
- Dimensions : (H x W x D) 609 x 370 x 370 mm (24.0 x 14.5 x 14.5")
- Net weight : 14.7 kg (32 lbs)
- Construction : Injection-moulded polypropylene enclosure
- Finish : Black painted
- Grille : Powder coated perforated steel
- Flying hardware : M10 x 3 points
Accessories
- IQ12-WB Steel wall bracket
Turbosound iQ18B - 3000-Watt 18" Powered Subwoofer
System
- Frequency Response : 50 Hz – 130 Hz ±3 Db, 40 Hz – 130 Hz -10 dB
- Nominal Dispersion : Half Space
- Maximum SPL : 130 dB peak
- Crossover type : Active
- Transducers : 1 x 18" (460 mm) LF driver
- Limiter : Peak and rms
Amplifier
- Maximum output power* : 3,000 W
- Type : Class-D
- Protection : Short circuit, open circuit, thermal
Connectors
- Input A / B : 2 x combo jack/XLR
- Sensitivity : Line +4 dBu, mic -22 dBu, switchable
- Input impedance : 20 kΩ unbalanced, 40 kΩ balanced
- Maximum input level : +21 dBu
- Output A / B : 2 x XLR Linked to input
- Mix output : N/A
- Output impedance : N/A
- Ultranet input/link : 2 x RJ45
- Mains Supply : Neutrik powerCON input 20A and link 15A
Controls
- DSP : Rotary push-encoder, Buttons for PROCESS, SETUP, EXIT, ENTER
- Mixer section : 1 x gain controls (channels A and B), 2 x Line
User DSP Functions
- Factory EQ presets : Positioning, Sound mode
- Display : LCD 128 x 32, blue backlit
- Delay : 0 - 300 ms
- Equalisation : High and low shelving EQ, 2 x parametric EQ
- Limiter : Zero attack input limiter
- Presets : 20 total presets, 19 user-definable
- Crossover : High Pass L-R 24 dB/oct
- Protection : Lock-out function for all settings
Ultranet Digital Network
System
- Signal : 16 channels
- Latency : < 0.9 ms
Cabling
- Cables : Shielded CAT5
- Cable length : max. 246 ft / 75 m recommended
Power Supply
- Power consumption : 200 W @ 1⁄8 max power
Voltage (fuses)
- USA / Canada : 120 V~, 60 Hz (T 15 A H 250 V)
- UK / Australia / Europe : 220-240 V~, 50/60 Hz (T 10 A H 250 V)
- Korea / China : 220-240 V~, 50/60 Hz (T 10 A H 250 V)
- Japan : 100 V~, 50/60 Hz (T 15 A H 250 V)
Enclosure
- Dimensions : 691 x 533 x 559 mm (27.2 x 21.0 x 22.0")
- Net weight : 39.8 kg (87.5 lbs)
- Construction : Birch plywood, screwed, and glued
- Finish : Black painted
- Grille : Powder coated perforated steel
- Flying hardware : N/A
Ultimate Support JS-TS50-2 Pair of Tripod Speaker Stand with Carrying Bag
Specs:
-
Product Name: JS-TS50-2
-
Part Number: 17318
-
Height: 46.5” – 81.5”
-
Base Diameter: 47”
-
Load Capacity: 120 lbs.
-
Telescoping Tube: 1 3/8” (35mm)
-
Weight (Per Stand): 4.2 lbs.
Gator Cases GPA-TOTE12 12" Speaker Tote
Manufacturer's Description
Turbosound iQ12 - 2500-Watt 2 Way 12" Powered Loudspeaker
2500 Watt 2 Way 12" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking
iQ12
The 2,500-Watt iQ12 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 12" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ12 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ12’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ12’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ12 features a mic/line switch and level control with signal present LED on each channel.
The iQ12 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ12 via PC computer, as well as DSP and speaker modelling firmware updates.
The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ12 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.
Features
- 2 way full range loudspeaker for portable PA and installation applications
- 2,500 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- Speaker modelling includes accurate models of industry standard speakers
- SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
- ULTRANET digital audio networking connects to mixers and other sources
- 12" low frequency driver with low mass voice coil for improved transient response
- High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- Lightweight fibre glass reinforced composite enclosure
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Multiple internal rigging points for installation applications
- Mains input and link output on Neutrik powerCON* connectors
- 3-Year Warranty Program*
- Designed and engineered in the U.K.
Turbosound iQ18B - 3000-Watt 18" Powered Subwoofer
3000 Watt 18" Powered Subwoofer with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking
iQ18B
The 3,000-Watt iQ18B is a front loaded 18" powered subwoofer ideally suited for a wide range of portable and fi xed installation, music and speech sound reinforcement applications. The high excursion 18" low frequency driver with double suspension low mass 4" voice coil provides fast and accurate transient response for virtually distortion-free operation – even in the most demanding performances.
Equipped with a very effi cient and lightweight KLARK TEKNIK Class-D power amplifi er, the iQ18B provides an impressive 3,000 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and defi nition at high output levels – and long-term reliability. iQ18B’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected speaker systems.
On the rear panel amplifi er module, you will fi nd a fully featured user interface consisting of an LCD display, the Channel A/B gain control, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, and Feedback Control (FBI). In addition to the two combination balanced XLR/ jack inputs and balanced XLR outputs for powered satellite loudspeakers, the iQ18B features a mic/line switch and level control with signal present LED.
The iQ18B also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also signifi cantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ18B via PC computer, as well as DSP and speaker modelling fi rmware updates.
The birch plywood enclosure is fi nished in a hard wearing semi matt black paint and fi tted with a rugged powder coated perforated steel mesh grille, 35 mm pole mount to support a satellite speaker, and plated steel castors with rubber tyres. Mains power input and link output is provided via Neutrik powerCON* connectors.
Features
- Front loaded powered subwoofer for portable PA and installation applications
- 3,000 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- Speaker modelling includes accurate models of industry standard speakers
- ULTRANET digital audio networking connects to mixers and other sources
- High excursion 18" low frequency driver with 4" voice coil and double suspension
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- Birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- 35 mm pole mount to support satellite speaker
- Plated steel castors with rubber tyres
- Mains input and link output on Neutrik powerCON* connectors
- 3-Year Warranty Program*
- Designed and engineered in the U.K.
Ultimate Support JS-TS50-2 Pair of Tripod Speaker Stand with Carrying Bag
Speaker stands need to be both sturdy and easy to move. The Speaker Stand (Pair) fits on both accounts, giving you a stable environment in which to elevate your speakers to optimum height. Crafted from aluminum and powder-coated for finish durability, these stands will give you years of service. Each stand can hold up to 120 lbs. The strong telescoping and leg collars provide a stable stand for your speakers. The height adjustment collar has a safety pin for extra security. The JS-TS50-2 also includes a handy carry bag for FREE!
JS-TS50-2 Pair of Tripod Speaker Stand with FREE Carrying BagFeatures:
-
Part Name: JS-TS50-2
-
Long-lasting aluminum construction
-
Durable powder-coated finish
-
Tripod base is very stable and sturdy
-
Stand is height-adjustable
-
Carrying bag included for FREE!
-
Holds up to 120 lbs.
-
Height 46.5" - 81.5"
Pig Hog PHM25 8mm Microphone XLR Cable 25ft
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!
Features
-
High performance microphone cable
-
8mm high quality rubber outer covering
-
Heat shrink protected connectors
-
Lifetime guarantee
Gator Cases GPA-TOTE12 12" Speaker Tote
Heavy-Duty Speaker Tote Bag for Compact 12" Cabinets
Features
- Lightweight Speaker Tote Bag Designed to Fit the Hottest 12” Speaker Cabinets on the Market
- Rugged Water Resistant Polyester Construction
- Protective, Padded Interior with Soft Lining
- Heavy-Duty Dual Zipper Design Opens Entire Top of Bag for Easy Loading and Unloading
- Secure-Wrap, Reinforced Dual Handles and Straps Distribute Weight of the Speaker and Reduce Wear on the Bag
- Ample Storage with Large Exterior Pocket for Cables and Accessories
- Designed to Fit QSC K12, Turbosound iQ12, and Yamaha DRX12