Kemper Profiler Head Guitar Amp System with Remote
Kemper Profiler Head Guitar Amp System
The Kemper Profiler is the leading-edge digital guitar amplifier and all-in-one effects processor.
Hailed as a game-changer by guitarists the world over, the Profiler is the first digital guitar amp to actually "nail" the real, full and dynamic sound of a guitar or bass amp. This is made possible by the radical, and patented technological and conceptual approach we call "Profiling".
For decades, the electric guitarist has effectively been shackled to the tube amplifier as the only means of achieving "that sound". This combination is undoubtedly glorious, but far from ideal. Achieving consistent results between the practice room, the studio and the stage presents a significant challenge to guitarists, just as it has since the early 1940's.
The Profiler Head comes with classic curves. It makes a perfect figure on a 4x12 cabinet. Still it's so compact and light that can be taken as handluggage onto an plane. The footprint of the Head is tiny, designed to stand on the desk of your project studio, right beside your computer.
The Desktop/Head amp comes fully equipped with hundreds of studio grade amp profiles suitable for both Live and Studio artists. Lifetime free feature updates including new effects, additional content and other enhancements. This edition features a white face plate and green housing.
The Head amp comes fully equipped with hundreds of studio grade amp profiles suitable for both Live and Studio artists. Dozens of high end professional stomp box emulations and effects. Lifetime free feature updates including new effects, additional content and other enhancements. Complimentary access to Rig Exchange, a cloud based service with over 5000 additional amp profiles.
This edition features a white face plate and green housing.
- Kemper Profiler Head in white
- Power Cable
- User Manual
- Dimensions: 37.8 cm (14.88 inches) x 21.7 cm (8.54 inches) x 17.3 cm (6.81 inches)
- Weight: 5.32 kg (11.73 pounds)
- Line voltage: 100-125 or 190-245V AC
Kemper Profiler Remote
DESIGNED TO WORK SEAMLESSLY WITH PROFILER
Profiler Remote is the quintessential foot controller for your Profiler. We’ve spent a tremendous amount of time to create a versatile and yet easy to operate floor board. The tight integration in between Profiler and Remote allows you to control, administer and program without any knowledge about MIDI or delving through cryptic data sheets.
The large, illuminated display is designed to be looked at from a distance and Remote's housing is built like a tank. Just what the doctor orders for touring musicians on dark stages.
Five buttons allow you to directly access five different programs ("Rigs") and entire performance programs can be switched using a bank system. There are dedicated buttons to access the tuner, tap tempo in and enable the new, exclusive Looper Effect.
Remote connects via a single Ethernet cable to your Profiler. No extra power supply is required and the included cable is 7 meters long (21ft). Longer cables are possible as well.
Up to four continuous foot pedals can control multiple parameters inside your Profiler. Four buttons switch of stomps and effects. The programming required is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.
There is something magic about loopers. Doesn’t matter if you use them to create layered worlds of sound or to rehearse the complex middle-8 of your last composition.
With a single click on a button, Remote turns into a fully fledged Looper control station. Loops can be recorded, overdubbed and deleted by using the buttons on the board. You can reverse, halftime and undo takes. The maximum duration of a loop is thirty seconds. The Looper is exclusively available to Remote users.
Four buttons, which can be assigned individually for every program, can control multiple stomp effects at the same time. In order to associate an effect with a button, all you need to do is: Press a stomp button on your Profiler and hold the button of your choice on Remote at the same time. Done.
MADE WITH TOURING IN MIND
Remote connects to Profiler with a single cable. We are using a Neutrik® etherCON® connector to ensure the most robust connection possible on stage. By using a powered ethernet hub, distances in excess of 100 meters (300ft) can be bridged with a simple Ethernet cable.
CONTROLLERS AND SWITCHES
The four TRS connectors on the rear panel can be used for continuous controllers and switches. Each controller can be freely assigned per program. Multiple assignments per controller are also possible. Status color LEDs give you a great overview on assignments and purpose of a switch/pedal."
ADMINISTER OTHER EQUIPMENT
Remote allows you to control external MIDI gear by sending program change messages utilizing the MIDI output of your Profiler.