ART SLA-4 4-Channel 140 Watts Per Channel Audio Power Amplifier

Manufacturer's Description

Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.

SLA-4 Applications:

• The SLA-4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes
• Separate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs
• Maximizes flexibility by allowing the amp to be configured for best utilization in 2, 3, or 4 channel applications
• Designed for long-term reliability in any audio application, the SLA-4’s output is fully protected from short circuits.
• An ultrasonic network decouples RF from the output and helps keep the amplifier stable with reactive loads
• SLA-4 is stable into loads as low as 2 ohms (stereo mode) or 4 ohms (bridged mode) making it ideal for virtually any installation application or complex system configuration
• The SLA-4 features SmartFan, an advanced, thermal dependent fan assisted convection cooled system.
• The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier’s cooling needs
• 1/4-inch TRS and Euroblock balanced inputs as well as multi-way output binding posts are ensure the SLA4 can be quickly and easily tied in to any system without modification.
• Simple to install tamper proof cover is included

Features

• Extremely Low Noise, Discrete Linear Design
• 4 x 100 watts/Ch @ 8 ohms, 140 watts/Ch @ 4 ohms
• 2 x 200 watts/Ch @ 16 ohms, 280 watts/Ch @ 8 ohms (bridged)
• 2 x 100 watts/Ch @ 8 ohms & 1 x 280 watts @ 8 ohms (bridged)
• Toroidal Transformer
• 10 Hz to 40 kHz Frequency Response
• 1/4-inch TRS, and Euroblock Balanced Inputs
• Recessed “Pop Out” Detented Gain Knobs
• Tamper-Proof Faceplate Included Multi-way Binding Post Outputs
• Low Profile 1U Rack-Mountable Design
• SmartFan Silent Cooling System

Specifications

• Bridged Output Power, 16 Ohms: 2 x 200W/Channel RMS
• Bridged Output Power, 8 Ohms: 2 x 280W/Channel RMS
• CMRR: > 60dB (typical @1kHz)
• Damping Factor: > 100
• Frequency Response: 10Hz to 40kHz, +/- 0.5dB
• Total Harmonic Distortion: <0.05% (typical)
• Hum and Noise: > 100dB below clipping
• Input Impedance: 44k Ω (balanced) / 22k Ω (unbalanced)
• Input Sensitivity: 1V for full power output into 8 Ω
• Input/Output Connections: 1/4-inch TRS/Euroblock (Input) / Multi-Way Binding
• Minimum Load Impedance, Mono: 4 Ω (Bridged)
• Minimum Load Impedance, Stereo: 2 Ω (Stereo)
• Slew Rate: > 20V/uS
• Stereo Output Power, 4 ohms: 4 x 140 W/Channel RMS
• Stereo Output Power, 8 ohms: 4 x 100W /Channel RMS
• Transformer Type: Toroidal
• Dimensions: 1.75″ x 19″ x 13.5″ / 44.5mm x 483mm x 190.5mm
• Weight: 19.8lbs (9.0kg)
• Power Requirements: 120VAC 60Hz 1000 W (max)